Skip to main content

Posts

Showing posts from August, 2010

Solid Edge ST3 – Post 3 of 4

As Promised, here is my 3 rd post on Solid Edge ST3’s customer driven enhancements. This time, the topic is Piping, Framing, and Weld enhancements. Let’s start with Frames. Frames are made up of 3 items for each frame member: The sketch defining the path, the cross section defining the shape, and the resulting member as a solid model. With ST3, some work was done with the cross sections to add additional attachment points which are used to attach the cross sections to the paths. In addition to the prior default of the geometry Range Box showing the 8 points defining the rectangular extents boundary around the shape and the center point, you can now define the cross section’s path attachment point by using key points (end/mid/center/etc.) on the cross section’s defining sketch (including reference elements) or the cross section’s area centroid. In addition to the new locating methods, cross sections are now associative to the members that they have defined (so changes to the cross ...