Skip to main content

Solid Edge ST2

Solid Edge ST2 is now shipping to customers and is available for download. A couple notable new features are Solid Edge Simulation and Synchronous Sheet Metal.

Solid Edge Simulation is a an embedded implementation of Siemens PLM's standalone FEA product FEMAP. Prior to ST2, Solid Edge shipped with a feature called FEMAP Express (now called "Simulation Express" in ST2) which was limited in load/constraint options and to single parts. In ST2, Simulation Express is still what's included with the product but Solid Edge Simulation can optionally be purchased as an add-on license through your normal sales channel. The good news is that Solid Edge ST2 does come with a temporary license for Solid Edge Simulation good through December, so install early so that you can try it out.

Now as I mentioned earlier, Solid Edge Simulation is an integrated implementation of FEMAP. What this means is that it has a lot of FEMAP's capabilities, but the UI is Solid Edge's which means it's easy to use.

Now for a list of capabilities over Simulation Express:
  • Assemblies (Synchronous only)
  • Complete environment with dedicated ribbon bar and vertical feature tree pane
  • Additional Loads and Constraints
  • Multiple "studies"
  • Export to FEMAP ".MOD" files
  • Multiple results options including the ability to probe nodes

Synchronous Sheet Metal is a new environment based on the Synchronous Technology concepts introduced in ST1. It allows modeling and modification of sheet metal models through direct action to the model while still retaining the intelligence that it is sheet metal. What this means is that sheet metal can be created quickly and edited even quicker. Imported models can also be transformed into a Synchronous sheet metal models as long as they are comprised of common thicknesses.

Obviously there are many other enhancements and new features with ST2, way too many to mention here. I encourage you to try it out when you receive it, especially Solid Edge Simulation before the trial license expires at the end of December.

Comments

Anonymous said…
Thought I'd add that MP1 for Solid Edge with synchronous technology 2 is now avaialble for download and supports Windows 7. Customers with active maintenance can get it at http://support.ugs.com/

Kris Kasprzak

Popular posts from this blog

Solid Edge ST3 - Part 1 of 4

The Siemens PLM Connection event is over.  Given the change of date and venue due to the flooding of the Opryland Hotel in Nashville, it was a great success.  There were many excellent presentations and "hands-on" training sessions for Solid Edge (including mine) , and even though a formal announcement of the upcoming ST3 is some time away, we got a sneak peak of several new customer driven enhancements as well as some hint of: A "bridge" to help existing users better adopt Synchronous Technology Simulation enhancements PDM enhancements 1000's of customer enhancements from modeling to the user interface Over the next few weeks, I'd like to cover some of the items presented around the customer driven enhancements, but please keep in mind there are still a whole lot of items that will not be presented until the official Solid Edge ST3 launch later in the year. For this post, I would like to cover the User Interface enhancements. You now have...

Solid Edge Replace Part Options

If you are not familiar with the Solid Edge Replace Part command, it is an Assembly based command used to do what the name implies… replace a part or sub-assembly with another part or sub-assembly. In past releases of Solid Edge, the Replace Part command was a solo act that had the ability of replacing a single part or sub-assembly occurrence or all occurrences of that selection with a user specified replacement part or sub-assembly that already existed. With the release of Solid Edge ST5 and subsequent releases, the Replace Part command was actually expanded into 4 different Replace Part commands, each with their own specific capabilities. Replace Part Replace Part is similar to the previous Replace Part command in that it is used to replace a part with one that has already been created, however it was expanded to allow not only the selection of a single occurrence or all occurrences of the selection, but also allows a user to select different parts and/or specified num...

Dimension Projection Line Breaks

Often when placing dimensions on drawings, the projection lines of some dimensions will cross the projection lines of other dimensions as shown below. Solid Edge provides a function to automatically create breaks in one extension line where it crosses another. This function is called "Add Projection Line Break". It is accessible from the Shortcut Menu when you have a dimension highlighted. The result is shown below. If you wish to remove the projection line break, highlight the dimension, invoke the shortcut menu, and select "Remove Projection Line Break".