Skip to main content

Solid Edge ST3 - Part 2 of 4 - Part, Sheet Metal, and Assembly

As promised, I'm back with some additional information about the upcoming release of Solid Edge ST3 (later this year).  This post will hit on some of the customer driven enhancements in the Part, Sheet Metal, and Assembly design environments.  As a reminder, this is in no way a complete list of enhancements in these areas.

New to ST3 Sheet Metal is the Etch feature.  It allows text or other sketch elements to be created on sheet metal faces which will then be transformed with the model when flattened.  When the Flat Pattern is saved to DXF, text is translated to a "stick" font engraving ready!


New Closed Corner types have been added to Sheet Metal such as U & V shaped, Square and Mitred.



Tabs and PMI can now be added to the flattened Sheet Metal model and they will not display in the folded model.  This flattened model can then be saved to JT.

Interpart relations are now shown in Part & Sheet Metal Pathfinder allowing easier navigation and investigation.  The listed items can include: Context Assembly, Included Edges, Feature Keypoints, Interpart Copies, Linked Variables, and Reference Planes.  It is even available if the part is opened outside of the context of the assembly.

Interpart relations are also shown in Assembly Pathfinder showing a clear indication of whether the link is Driving the selected component or the selected component is driving something else.  Also new is the ability to Freeze or Thaw Interpart links. Freeze will allow you to inactivate links for instance on release files to prevent updates and Thaw will allow you to reactivate them later so they will update when performing a revision. 


Display Configurations have received an overhaul and there are several new capabilities:


  • Configuration Manager which provides a "spreadsheet" like view of all configurations and components. and allows you to modify each configuration as well as identify new components since the configuration was last modified.



  • Snapshot which allows a quick capture of the current display state which can be retrieved quickly later.


  • Copy Current Display which will allow you to copy the current display state of selected components to an existing configuration

  • New Drop List which will allow multiple configurations to be selected and applied together and it also allows selection of Zones to be applied as well.

Now the last item I'm going to mention is not something I can not show you in a BLOG post, so your going to have to wait to see it in a Siemens PLM demonstration of Solid Edge ST3 or when the software ships to you, but it is quite important and quite remarkable so I feel I need to mention it... It is a 3D graphics performance improvement of up to 10X.  That's right, 10X!  Now Solid Edge was pretty fast before, but depending on the display settings used frame rates could drop on larger models.  Now expect those models to fly on the screen.

Now as I stated at the beginning, this is just a few of the customer driven enhancements in Solid Edge ST3.  There is still much more than what I've covered.  Stay tuned because in another couple of weeks I'll post some more about ST3.

Comments

Roger Reid said…
Ken
The new V-shaped cutout looks fantastic. This along with the etch facility takes SE ahead in sheetmetal once again.
ST3 is shaping up to be a very signfiicant release.

Now if they integrate trad. and sync environments like NX........

roger
meanyuncle said…
Looks good. Did I miss Part 1 of 4?
PellaKen said…
Yes, but the title was a bit misleading. I have rewritten the title of the first post to make it more clear.

Popular posts from this blog

Solid Edge ST3 - Part 1 of 4

The Siemens PLM Connection event is over.  Given the change of date and venue due to the flooding of the Opryland Hotel in Nashville, it was a great success.  There were many excellent presentations and "hands-on" training sessions for Solid Edge (including mine) , and even though a formal announcement of the upcoming ST3 is some time away, we got a sneak peak of several new customer driven enhancements as well as some hint of: A "bridge" to help existing users better adopt Synchronous Technology Simulation enhancements PDM enhancements 1000's of customer enhancements from modeling to the user interface Over the next few weeks, I'd like to cover some of the items presented around the customer driven enhancements, but please keep in mind there are still a whole lot of items that will not be presented until the official Solid Edge ST3 launch later in the year. For this post, I would like to cover the User Interface enhancements. You now have...

Solid Edge Replace Part Options

If you are not familiar with the Solid Edge Replace Part command, it is an Assembly based command used to do what the name implies… replace a part or sub-assembly with another part or sub-assembly. In past releases of Solid Edge, the Replace Part command was a solo act that had the ability of replacing a single part or sub-assembly occurrence or all occurrences of that selection with a user specified replacement part or sub-assembly that already existed. With the release of Solid Edge ST5 and subsequent releases, the Replace Part command was actually expanded into 4 different Replace Part commands, each with their own specific capabilities. Replace Part Replace Part is similar to the previous Replace Part command in that it is used to replace a part with one that has already been created, however it was expanded to allow not only the selection of a single occurrence or all occurrences of the selection, but also allows a user to select different parts and/or specified num...

Dimension Projection Line Breaks

Often when placing dimensions on drawings, the projection lines of some dimensions will cross the projection lines of other dimensions as shown below. Solid Edge provides a function to automatically create breaks in one extension line where it crosses another. This function is called "Add Projection Line Break". It is accessible from the Shortcut Menu when you have a dimension highlighted. The result is shown below. If you wish to remove the projection line break, highlight the dimension, invoke the shortcut menu, and select "Remove Projection Line Break".