Skip to main content

Opening AutoCAD Drawings in Solid Edge

Solid Edge V19 can open AutoCAD files up through version 2004. To open them, all one must do is start Solid Edge, invoke the Open command, change the Filetype to DWG, and select the file.

Solid Edge also has a wizard based option form that allows you to configure how the AutoCAD file is converted. To access the options, select the desired DWG file with a single click and the Options button found on the lower left of the Open form will become active. Click it.

The Options form consists of 8 pages that deal with specific translation options such as DWG element color to SE line width mapping, hatch mapping, font mapping, etc... All of these settings are written to an INI file, and multiple INI files can be kept and a different one specified for specific translation jobs if desired.

Comments

Anonymous said…
Nice fill someone in on and this post helped me alot in my college assignement. Say thank you you for your information.
February 2, 2010 at 3:05 AM
Post a Comment

Popular posts from this blog

Solid Edge ST3 - Part 1 of 4

The Siemens PLM Connection event is over.  Given the change of date and venue due to the flooding of the Opryland Hotel in Nashville, it was a great success.  There were many excellent presentations and "hands-on" training sessions for Solid Edge (including mine) , and even though a formal announcement of the upcoming ST3 is some time away, we got a sneak peak of several new customer driven enhancements as well as some hint of: A "bridge" to help existing users better adopt Synchronous Technology Simulation enhancements PDM enhancements 1000's of customer enhancements from modeling to the user interface Over the next few weeks, I'd like to cover some of the items presented around the customer driven enhancements, but please keep in mind there are still a whole lot of items that will not be presented until the official Solid Edge ST3 launch later in the year. For this post, I would like to cover the User Interface enhancements. You now have...
14 comments
Read more

Solid Edge Replace Part Options

If you are not familiar with the Solid Edge Replace Part command, it is an Assembly based command used to do what the name implies… replace a part or sub-assembly with another part or sub-assembly. In past releases of Solid Edge, the Replace Part command was a solo act that had the ability of replacing a single part or sub-assembly occurrence or all occurrences of that selection with a user specified replacement part or sub-assembly that already existed. With the release of Solid Edge ST5 and subsequent releases, the Replace Part command was actually expanded into 4 different Replace Part commands, each with their own specific capabilities. Replace Part Replace Part is similar to the previous Replace Part command in that it is used to replace a part with one that has already been created, however it was expanded to allow not only the selection of a single occurrence or all occurrences of the selection, but also allows a user to select different parts and/or specified num...
Post a Comment
Read more

Dimension Projection Line Breaks

Often when placing dimensions on drawings, the projection lines of some dimensions will cross the projection lines of other dimensions as shown below. Solid Edge provides a function to automatically create breaks in one extension line where it crosses another. This function is called "Add Projection Line Break". It is accessible from the Shortcut Menu when you have a dimension highlighted. The result is shown below. If you wish to remove the projection line break, highlight the dimension, invoke the shortcut menu, and select "Remove Projection Line Break".
1 comment
Read more